right

Go Back   Rotorcraft Australia Forums > Gyrocopters > Workshop > Tips and Tricks

Notices

Tips and Tricks Got any "Tips" or "Tricks" you might want to share?

Advertisement
Want to advertise?  

Reply
 
LinkBack Thread Tools Display Modes
Old 20-09-2006, 03:34 PM   #1 (permalink)
Junior Member
 
Bazza's Avatar
 
Join Date: Sep 2006
Location: Coffs Harbour
Posts: 30
Bazza
Looking after pollycarbonate

Has anyone had problems with their pollycarb,Lexan windshields crazing.
I used to cover mine with a piece of air mattress, you know the one with the velour on one side.

In a matter of a couple of months my screen would be crazed so much you couldn't see through it.
I thought it might have been the spray and wipe i was using to clean it so I didn't use that stuff on the next one.

The next screen crazed up in no time, I kept going back to the supplyer but they couldn't offer any solution as to what was causing it other than fuel fumes because I cover the machine with a heavy rubber tarp but only after it has cooled down .

So three windsceens later and a shitload of money they gave me a piece of paper with what you can't put near the pollycarbonate.
On the list was plastics of any kind,so there was the culprit, the bloody plastic mattress.

I have had a new screen now for 4 months and no sign of crazing, it seems that plastics let off a vapour that attacks
the lexan.

I now cover the screen with a cotton sheet.
I hope this may save someone the frustration and expence I went through.

Bazza.
__________________
Just do it,forgiveness comes easier than permission
Bazza is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 20-09-2006, 03:50 PM   #2 (permalink)
Administrator
 
rotor's Avatar
 
Join Date: Apr 2004
Location: Gladstone, Qld
Posts: 1,731
rotor is an unknown quantity at this point
Re: Looking after pollycarbonate

Thanks Baz,

might just save me a bit of work in the long run - have got pollycarb on the windows in the new project ... wouldn't want to be changing them every couple of months ...
Attached Images
File Type: jpg 00150.jpg (21.6 KB, 20 views)
Attached Files
File Type: jpg_thumb 00150.jpg_thumb (3.8 KB, 0 views)
__________________
Good judgment comes from experience and experience comes from bad judgment
rotor is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 20-09-2006, 06:04 PM   #3 (permalink)
Junior Member
 
Join Date: Sep 2005
Location: Sydney
Posts: 51
GyRoss is an unknown quantity at this point
Re: Looking after pollycarbonate

Also got to keep them clean,
Best way is to use Mr Sheen, and make sure you use it regularly, as the waxy layer stops the dirt from bonding to the screen.
To Clean it then use a very soft disposable paper towel.

Gyross
GyRoss is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 20-09-2006, 07:24 PM   #4 (permalink)
Senior Member
 
Join Date: Dec 2004
Posts: 811
BeefBear
Re: Looking after pollycarbonate

Perhaps we could ask Geoff to start a Handy Hints Thread group. Cotton Liners and Mr Sheen would rate very well as a start. Thanks Bazza And Ross/
__________________
Another day, another chance to ask why it is so?
BeefBear is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 21-09-2006, 12:51 AM   #5 (permalink)
Administrator
 
rotor's Avatar
 
Join Date: Apr 2004
Location: Gladstone, Qld
Posts: 1,731
rotor is an unknown quantity at this point
Re: Looking after pollycarbonate

Quote:
Originally Posted by BeefBear
Perhaps we could ask Geoff to start a Handy Hints Thread group. Cotton Liners and Mr Sheen would rate very well as a start. Thanks Bazza And Ross/
Good idea Ted ....
__________________
Good judgment comes from experience and experience comes from bad judgment
rotor is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 20-11-2006, 01:41 PM   #6 (permalink)
Junior Member
 
Join Date: Apr 2006
Location: Hervey Bay
Posts: 92
Sky Gazer
Re: Looking after pollycarbonate

Under no circumstances should you go any where near Polycarbonate with Metho, it is a sure fire method of causing it to fracture .

Rotor

Is that a one piece elevator on your new project?
Sky Gazer is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 20-11-2006, 08:27 PM   #7 (permalink)
Administrator
 
rotor's Avatar
 
Join Date: Apr 2004
Location: Gladstone, Qld
Posts: 1,731
rotor is an unknown quantity at this point
Re: Looking after pollycarbonate

Yes, the one piece elevator is called a stabilator.

__________________
Good judgment comes from experience and experience comes from bad judgment
rotor is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On
Forum Jump


All times are GMT +10. The time now is 04:15 AM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0
Template-Modifications by TMS

Copyright Rotorcraft Australia 2005
-----