Strip gyro to sell components

[markc]

Unregistered Gyro

This gyro has :
26ft AK blades - 10 hours -as new

Higgins head

EA 81 with C box(C box - 10 hours since recon). With Tim Mclure adaptor + flywheel and starter motor

72 inch Warp drive prop - unknown hours.

40 ltr Goodwin seat tank

Odysee battery

Pretty much as per photo above. The gyro flys at the moment but I dont have the time to get it to a decent standard.

Also have:
Jetstream rotor head with elec pre rotator - Rebuilt to new

72ltr Goodwin seat tank - New

40 ltr Goodwin seat tank - 2nd hand

It is in the Northern Territory. $6000 for the lot including a trailer to cart it in.

08-89750795

[Mitch]

G'Day Mark,

Long time Mate..... :cheers:

What price for the Jetstream head/pre-rotator?

Are you staying with gyros?

Cheers,

Mitch.

[markc]

G,day Mitch

Yeah , been busy as a cat covering shyte and doesnt appear to be much spare time in the near future.

With this gyro I have cut,shut,drilled,filed,modified,added to, crashed, rebuilt and tinkered with more than I care to admit. For many years thats what the "hobby" meant to me but not any more. I simply dont have the time. I plan to get a good basic machine and go flying when I get the opportunity. If there is no interest in the majority of these components I will just get a decent gyro built around them.

$550 for the Jetstream

Cheers mate

[Mitch]

G'Day Mark,

Glad to hear your staying in gyros.
Mate it's a pre-rotator set up that I'm chasing for Butterfly, now I'm old and tired :omfg: So is that price for Max's rotor head and pre-rotator, if so you have a sale. :yes: I'll understand if you are looking for $550 for the head alone as I realise that's what they cost.
Ole mate Nick has drawn me up some plans for pre-rotator sytem which I could cobble up.

I agree after two builds of Butterfly, I'm looking forward to flying not building.

You wouldn't have too much trouble getting interest at $6000 for the lot. Bargain in my book. I know how much time and effort you have put into your craft.

Cheers Mate,

Mitch.

[niquenaque]

Hmmm,

Speak of the devil....

Since I need a new set of Rotors for my beast and a new prop I´d like prices on same, only your prop is the wrong hand as yours is a gear box drive and mine is a belt drive, so, a price for the rotors if you would please.

I tried ringing but you were out, so if you read this before you ring me just post it here.

Cheers,

Nick

[Birdy2]

Dont do anythn Mark, ill get onto you soon's i get organised mate. [ got critters go'n hell west n crooked ere at the moment] :dizzy:
Recon ill take the machine as a hole.

[bones]

Mark and if he(birdy) dont buy it i will, so ring me or email me if you still got it, dont separate it it at all...

[Murray Barker]

To whoever buys this machine put the tail back another 6 inches or so(or further depending on rotor clearence) and put an anti-servo tab on it. The later I can supply free of charge.

[Mitch]

There you go Mark, :joy: :joy:

Two sales for the complete gyro already. :yes:

As I said Mark, if the re-built Jetstream head and pre-rotator are extra's to the craft itself, then I'll take those at your reaccessed price. Either way Mark, good luck and still looking forward till the day we charge our glassess :beer:

rocksfly@gmail.com OR 0419 254851

Well I'm off to have the back of my spine removed at three levels, so I really, really need a pre-rotator, even if it's ole mate spinnin up by hand for me. :hahano:

Hope life doesn't get to busy for you Mark.

Best regards,

Mitch.

[Mitch]

Just had a chat with Mark and I am pleased he has Bones and Birdy fighting over the spoils.

I'll wait for Nick to design the new belt drive pre-rotator......when was that gonna be ready Nick :poke:

Thanks Mark.

Fly Safe.

Mitch

[niquenaque]

Mitch,

I thought I already had... maybe the sketches weren´t detailed enough.

Tell you what though, I was thinking the other night that you´ve got a rotax on your machine - does it have a through the hole gearbox?? If it does that opens up all sorts of possibilities as to what can be done.

If you can do some photos and some rough dimensions on it I might be able to draw something a little more involved than the pencil sketches that I did at Uncle John´s place. I look forward to seeing them.

Cheers,

Nick.

[Mitch]

Sorry Mark,........

Nick I have the drawings I was wondering when the product would be available. He He He!
Looks like you wont be gettin them new blades ole Mate. :poke:

Cheers Mark :focus:

Mitch

[Birdy2]

sorry Mark, ol mate is lookn for a 2seater, so he wont be needn it.

[marko66]

Hi Mark

I'll try and give you a call, if I don't make it try me on 89767083

Regzards Mark

[markc]

Sold............Thanks for all enquiries.