PDA

View Full Version : Wonderlich Pre-rotator and Brake for 503 Rotax, short mast.



Mitch
07-05-2007, 12:02 AM
Wanted asap. Wonderlich.....Pre-rotator
Second hand.
Grounded till pre-rotator is installed. :censored: :censored: :censored:

Mitch.

russ
07-05-2007, 08:04 AM
Why "grounded" ???????????

Mitch
07-05-2007, 10:20 AM
G'DayRussell,

Multi level degenerative changes in the spine, impression of an intraforaminal disc at the C.8-T,1 level with the left C,8 nerve root...........
Increasing parethesisia left arm.......
Much referred pain.......

I have known all of this was comming, now I have to look after things a little better.

Wife will not allow spin up by hand.

Larry is working on a Metro Launch System for me for the Emperor 503 but now I'm back in the air , I dont want to be waiting long.

The other thing is I may have to go to a T bar control stick with right hand throttle twist.

Lameroo and the flying I got do do there was a great way to get back into the air, in anticipation.... :peace:


Mitch

russ
07-05-2007, 11:14 AM
Geeezus..........sorry to hear that. Christ, recently been down the "spine" thingo with our lad, what you learn from the docs is scary stuff.
Take care..........

marko66
07-05-2007, 11:24 AM
Hi Mitch

Sorry to hear about your back and I hope your back comes good or doesn't get any worse at least mate and the prerotater is just around the corner. :cheers:

Regards Mark

Aussie_Paul
07-05-2007, 11:47 AM
Wanted asap. Wonderlich.....Pre-rotator
Second hand.
Grounded till pre-rotator is installed. :censored: :censored: :censored:

Mitch.


Mitch, I think I have a Wunderlich rotor brake I don't need. :yes: You are welcome to it if I can find it and it is ok. I will have time to dig it out today if people would stop ringing me ordering Firebirds. :mrhappy

Aussie Paul. :wave:

Mitch
07-05-2007, 06:55 PM
Yes Russ,

How is your Boy?

Thanks Marko. Flyin again makes it all worthwhile. Flyin Blue Emperor Butterfly well that's just a whole other story.

PB, I'll take you up on that offer if it all pans out. Cheers,

Mitch.

Gyrodes
07-05-2007, 08:29 PM
Hi Mitch, Sorry to hear that your back is giveing you that sort of worry. Can understand where Elsie is comming from on this one. My shoulder was fine till Friday when I tripped the drill rods out of a 60 metre hole and now it is playing up again. May be I just need to get in the air to take my mind off it all. But then I have to convince the better half that that is the better reamidy. :cheers: Des Garvin.

Mitch
08-05-2007, 12:08 AM
Ats the way Des!

Gettin around the house is fraught with danger...need to be out and about flyin. :joy: :joy: :joy:

Mitch.

Mitch
11-05-2007, 01:09 AM
Hey PB,

Did you find the brake? Need an address to send it to.

Deano,

What's happening with the bits you have? $$ how much$$

Cheers,

Mitch.

Aussie_Paul
11-05-2007, 07:27 AM
Yes Mitch, I came across it yesterday. Yes, please send the address. You can write it on the back of a $100 note :yes: :yes:

Just joking. :peace: I am away to Echuca and the RAV Kotta fly in today and next Thursday off to Goondiwindi to deliver Hybrid. I will post it to you before we leave for Qld.

I hope that is ok.

Aussie Paul. :wave:

bones
11-05-2007, 11:03 AM
Mitch,
You may know that you can still get them direct from the manufacturer, they are still making all the gear that ol Dick made, the number is on the yanky forum, i can find it for you if you like..

Mitch
11-05-2007, 02:16 PM
Thanks Bones,

Yes I am aware that a complete unit can be purchased thru Tommy Milton Calmutair or such like. Tom does the 7.5 gall seat tanks and other odds and sods.

What with Deano's bits and pieces and what PB has, I might just need Muzza to whip me up a flywheel and Bob's your uncle.

Maybe.......... :wave: :wave:

PB....Greg Mitchell
242 Bevic Road,
Clarence Point.
Tasmania.
7270.

Let me know cost Paul. Thanks

Deano....give me a dollar figure and do you have a flywheel or not.?

Thanks Mate,

Mitch.

mattyg
11-05-2007, 04:14 PM
G'day Mitch, thats a bugger about the back mate. Hope the pre rotator works out. It's on my to do list this year after flyin dad's gyro at Lammaroo and being able to sit in the seat and pull the lever to get 'em spinnin, I'm hoooked. Hope the back heals up for ya. The wonderlich will help heaps. matt

Aussie_Paul
13-05-2007, 09:09 PM
Thanks Bones,

Yes I am aware that a complete unit can be purchased thru Tommy Milton Calmutair or such like. Tom does the 7.5 gall seat tanks and other odds and sods.

What with Deano's bits and pieces and what PB has, I might just need Muzza to whip me up a flywheel and Bob's your uncle.

Maybe.......... :wave: :wave:

PB....Greg Mitchell


242 Bevic Road,
Clarence Point.
Tasmania.
7270.

Let me know cost Paul. Thanks

Deano....give me a dollar figure and do you have a flywheel or not.?

Thanks Mate,

Mitch.


Mitch, I have just arrived home from the Kotta flyin near Echuca. I came home by bus and train as I have left Firebird at Echuca to have the new u/c fitted while I take G-400 to Qld.

I reckon I might have a pulley for the Wunderlich. I will search tomorrow.

Aussie Paul. :wave:

Mitch
14-05-2007, 02:11 PM
Excellent PB, looks like the brake and flywheel from you will complete a kit.
Hey Matt, Yeah, time to admit for me that the years are loadin up, need to make flyin a little less physical.
Thanks Fella's......flying again soon :yes:

Mitch.

Aussie_Paul
16-05-2007, 08:24 PM
Ok Mitch, I have found the drum as well as the rotor brake. Because I had a 3:1 ratio box this drum has a larger diameter than normal. I hope it will be of some help. With a bit of luck I will get them packed up tomorrow and sent Friday.

We were supposed to head off tomorrow to deliver Hybrid to Qld but we have postponed until Monday or Tuesday. This will allow me to give the new owner a little more training over the following weekend.

Boy :anger: do we need some more instructors. :redface: :redface:

Aussie Paul. :)

Mitch
17-05-2007, 02:40 AM
Standing by.............thanks Paul. :wave: What's a drum? :paper:

Mitch.

Aussie_Paul
17-05-2007, 09:50 AM
Standing by.............thanks Paul. :wave: What's a drum? :paper:

Mitch.


The drive drum between the prop flange and the prop.

Pics attached.

Aussie Paul. :wave: